digiSHOP :: Shopping Cart Software & Ecommerce :: Xantrex Truecharge 10TB Battery Charger from Quality Solar Conceptshttp://www.solar4me.com/Store/html/Products/Solar-Lights/index.html

	Appliances
	Batteries
	Battery Chargers
	Battery Enclosures
	Charge Controllers
	Electrical Breakers
	Electrical Fuses
	Electrical Shut-off
	Inverters, Grid Tie
	Inverters, Modified
	Inverters, Sine
	Meters, Displays
	Mounts, Flush
	Mounts, Low Profile
	Mounts, Side Pole
	Mounts, Top of Pole
	Mounts, Trackers
	Solar Heaters
	Solar Lights
	Solar Panels
	Solar Water Pumps
	Wind Turbines
	Wire + Connectors

Quality Solar Concepts of Rochester New York

Quality Brands
	AeroVironment
	Apollo Solar
	Beacon Power
	Blue Sea
	Blue Sky
	Boggart
	Cansolair
	Concorde
	Deka
	Energy Solar
	Evergreen
	Exeltech
	Flowlight
	Free-Energy America
	Fronius
	GE
	GNB
	Grundfos
	Ilsco
	Innovative Energy
	Invertek
	Iota
	Iowa Thin Film
	Kyocera Solar
	Lorentz
	MK Batteries
	Morningstar
	Outback Power
	Power up
	Power-One
	Powerfab
	Prowatt
	PV Powered
	Rogue
	Rolls Batteries
	Samlex
	Sanyo
	SCI
	Sharp Solar
	Shell Solar
	Shurflo
	Slowpump
	SMA
	Solarex
	Solarroofs
	Solectria
	Southwest
	Suncentric
	Sunwize
	Surrette
	Thermomax
	Trace
	Two Seas
	Uni-Solar
	Unirac
	Xantrex
	YourSolarHome

Xantrex Truecharge 10TB Battery Charger from Quality Solar Concepts

Price: $160.99
SKU:	Truecharge 10TB
Size:	2.75 x 6.5 x 10.65”
Output current:	10 A @ 14.5 V nominal
Output voltage Charge:	14.2 - 14.4 VDC
DC output connections:	Dual
Recommended battery type:	gel / flooded
Charger efficiency:	85% approx.

Qty:
	Add to Wishlist Email a Friend

Statpower Truecharge 10TB is a 10-amp continuous duty charger with enclosed screw terminals for safe, secure AC and DC connection. It features two outputs that are isolated from one another for simultaneous charging of two battery banks. One bank can be used for the engine, while the other can be used to recharge the house bank - or two house bank batteries can be recharged at the same time. Truecharge 10TB is also able to recharge completely discharged batteries (when voltage approaches 0 VDC).

Product Features
10 amp output Microprocessor controlled, multistage charging
Easy battery connection with clip leads
Supports charging for flooded or gel lead-acid batteries
Wide voltage range operation (90 to 135 VAC, 50/60Hz)
Three settings for temperature compensation
Automatic 21 day top-up
Lightweight, compact size

One year warranty
Protection Features
Over-tempeature shutdown
Non-sparking battery connection
Transformer isolated for safety and to protect against electrolysis
Reverse polarity protection (internal fuse)
Short-circuit and surge protection

Electrical Specifications
Output current 10 A @ 14.5 V nominal
Output voltage (nominal, depending on settings)
Charge 14.2 - 14.4 VDC
Float 13.5 - 13.8 VDC
DC output connections dual
Output fuses 15 A 32 V

AC input voltage 90-135 VAC, 50/60 Hz
Temperature compensation none
Charger efficiency 85% approx.
Recommended battery type gel / flooded

General Specifications
Operating temperature 0°C – 40°C
Storage temperature -25°C – 70°C

Battery connection two separate positive terminals, one common negative terminal AC and DC connections six position terminal block with No. 8 screws (for ring terminals with maximum 0.42 OD)

Dimensions (HxWxD) 2.75 x 6.5 x 10.65” (70 x 165 x 270 mm)
Weight 3.0 lb (1.4 kg)
Warranty One year
Part number 804-0111
Regulatory Approvals: CSA/NRTL approved to CSA 107.2, UL 1236. Note: Specifications subject to change without notice.

Three-stage Charging
Multistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:

Bulk: Replaces 70-80% of the battery’s state of charge at the fastest possible rate.

Absorption: Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate.

Float: Voltage is reduced and held constant in order to prevent damage and keep batteries at a full charge.

Back To List