Quality Solar Concepts is proud to introduce the BP BPSX-10U Solar Panel and Solar Module series solar modules. These modules are made with cell strings laminated between sheets of ethylene vinyl acetate (EVA) and tempered low iron glass. The solar panel frames are made of corrosion resistant anodized aluminum. BP solar panels long and narrow dimensions and a clear anodized frame set them apart from the BP Solar module MSX series. All the modules in the BP solar panel SX universal series have the same width but varying lengths. This makes it possible to use the same solar mount, Omni mount hardware,  for all solar panel models. This series of solar modules comes in three styles. Each BP solar module has a 25 year limited warranty 70 watts and larger. 1-12 years for 90% power output and 13-25 years prorated. Solar modules 10 watts or less have a 10-year warranty or 90% output

Quality Solar Concepts is proud to introduce the BP SX series solar panels, which are made with cell strings, laminated between sheets of ethylene vinyl acetate (EVA) and tempered low iron glass. Frames are made of corrosion resistant anodized aluminum. Their long and narrow dimensions and a clear anodized frame set them apart from the MSX series. All the modules in the SX universal series have the same width but varying lengths. This makes it possible to use the same Omni mount hardware for all models. This series of modules comes in three styles. 25 year limited warranty 70 watts and larger. 1-12 years for 90% power output and 13-25 years prorated. Limited 10 year warranty on 30 watts and smaller for 90% output.  BP SX 20U and 30U The BP SX 20U and 30U are designed primarily for industrial use and other particularly demanding applications. Their rugged Universal frame is suitable for severe duty, and exceeds the requirements of all certifying agencies.

Quality Solar Concepts is proud to introduce the BP SX series solar panels, which are made with cell strings, laminated between sheets of ethylene vinyl acetate (EVA) and tempered low iron glass. Frames are made of corrosion resistant anodized aluminum. Their long and narrow dimensions and a clear anodized frame set them apart from the MSX series. All the modules in the SX universal series have the same width but varying lengths. This makes it possible to use the same Omn imount hardware for all models. This series of modules comes in three styles. 25 year limited warranty 70 watts and larger. 1-12 years for 90% power output and 13-25 years prorated. Limited 10 year warranty on 30 watts and smaller for 90% output.  BP SX 20U and 30U Solar Panels.  The BP SX 20U and 30U solar panels are designed primarily for industrial applications. Their rugged Universal frame is suitable for severe duty, and exceeds the requirements of all certifying agencies.

 High efficiency 170 watt photovoltaic module using silicon nitride MultiCrystalline cells. The BP SX 170 photovoltaic module provides superior value and performance for grid-connected residential and commercial systems, operating AC loads through an inverter, or DC loads directly

Performance

Rated Power (Pmax): 170 watts
Power tolerance: ± 10%
Nominal voltage: 24 volts
Limited Warranty: 25 years

Configuration

BP SX 170B - Module with bronze annodized frame and quick-connect cables

Quality Solar Concepts is proud to introduce the BP350U solar panel.  BP solar modules are time tested and will deliver power for over twenty years.  The 350U photovoltaic panel / module is designed for DC loads with moderate energy requirements. With two sets of 36 efficiency-enhanced cells in parallel, the 350U charges 12V batteries (or multiples of 12V) efficiently in virtually any climate. An installed diode offers flexibility, enabling two or more 350U modules to be put into series safely. The 350U is also well suited to providing subsistence power to homes in remote areas without utility (mains) service.

Model: 350U  Type: Silicon Nitride Multicrystalline
Power: 50 watts  Dimensions Length: 839mm (33”) Width: 537mm (21.1”) Depth: 50mm (1.97”)

Weight 6.0 kg (13.2 pounds) Solar Cells 72 cells (42mm x 125mm) in a 4x18 matrix connected in 2 parallel strings of 36 in series  Junction Box U-Version junction box with 6-terminal connection block; IP 54, accepts PG 13.5, M20, ½ inch conduit, or cable fittings accepting 6-12mm diameter cable.
Terminals accept 2.5 to 10mm2 (8 to 14 AWG) wire.
Diodes One 9A, 45V Schottky by-pass diode included. 

Construction  Front: High-transmission 3mm (1/8th inch) tempered glass; Back: Tedlar; Encapsulant: EVA Frame Clear anodized aluminum alloy type 6063T6 Universal frame; Color: silver

Warranty: Power output for 25 years. Freedom from defects in materials and workmanship for 5 years.

These data represent the performance of typical BP 350 solar products, and are based on measurements made in accordance with ASTM E1036 corrected to SRC (STC.)   During the stabilization process that occurs during the first few months of deployment, module power may decrease by up to 3% from typical Pmax.

Quality Solar Concepts is proud to introduce the BP 365 photovoltaic module which is designed to provide superior value and performance for industrial use applications. With time-tested multi-crystalline silicon solar cells and 65watts of nominal maximum power, it provides cost-effective power for DC loads or, with an inverter, AC loads. With 36 enhanced-efficiency cells it charges 12V batteries (or multiples of 12V) efficiently in virtually any climate.
Electrical Characteristics
Maximum power (Pmax)	365W
Voltage at Pmax (Vmp)	17.6V
Current at Pmax(Imp)	3.69A
Warranted minimum Pmax	60W
Short-circuit current (Isc)	3.99A
Open-circuit voltage (Voc)	22.1V
Temperature coefficient of Isc	(0.065±0.015)%/ °C
Temperature coefficient of Voc	-(80±10)mV/°C
Temperature coefficient of power	-(0.5±0.05)%/ °C
NOCT	(Air 20°C; Sun 0.8kW/m 2 ; wind 1m/s) 47±2°C
Maximum series fuse rating	20A
Maximum system voltage 600V	(U.S. NEC & IEC 61215 rating)

Quality Solar Concepts introduces the BP 380 photovoltaic module, which is designed to provide superior value and performance for remote home, industrial, and residential use. With time-tested multi-crystalline silicon solar cells and 80 watts of nominal maximum power, it provides cost-effective power for DC loads or, with an inverter, AC loads.   80 watts, 4.55 Amps, 17.6 Volts, Size=22" x 48" Weight= 17Lbs

Premium efficiency 85 watt photovoltaic module using silicon nitride MonoCrystalline cells. The BP 485 photovoltaic module provides superior efficiency and performance for commercial and industrial use, operating DC loads directly or, in an inverter-equipped system, AC loads

Performance

Rated Power (Pmax): 85 watts
Power tolerance: ± 5%
Nominal voltage: 12 volts
Limited Warranty: 25 years

Configuration

BP 485U - Framed module with high capacity junction box

Electrical Characteristics

Maximum power (P max)             85W

Voltage at Pmax (Vmp)                17.8V

Current at Pmax (lmp)                              4.9A

Warranted minimum Pmax               8.75W

Short-circuit current (lsc)                 5.4A

Open-circuit voltage (Voc)               22.0V

Temperature coefficient of lsc                    0.065±0.015)%/˚C

Temperature coefficient of Voc      -(80±10)mV/˚C

Temperature coefficient of power  -(0.5±0.05)%/˚C

NOCT (Air 20°C; Sun 0.8kW/m²; wind 1m/s)            47±2˚C

Maximum series fuse rating               15A {S,L} 20A {U}

High efficiency 125 watt photovoltaic module using silicon nitride MultiCrystalline cells. The BP 3125 photovoltaic module provides superior value and performance for commercial and industrial use, operating DC loads directly or, in an inverter-equipped system, AC loads

Performance

Rated Power (Pmax): 125 watts
Power tolerance: ± 5%
Nominal voltage: 12 volts
Limited Warranty: 25 years

Configuration

BP 3125S - Framed module with polarized cable connectors
BP 3125U - Framed module with high capacity junction box

Premium efficiency 175 watt photovoltaic module using enhanced silicon nitride MonoCrystalline cells and featuring a black backsheet and frame. The BP 4175 photovoltaic module provides superior performance and aesthetics for grid-connected residential systems

Performance

Rated Power (Pmax): 175 watts
Power tolerance: ± 5%
Nominal voltage: 24 volts
Limited Warranty: 25 years

Configuration

BP 4175B - Framed module with bronze anodized frame and black backsheet